Product/Service

150°F Electric Drawer Oven

Source: The Grieve Corporation
No. 845 is a 150°F electrically-heated drawer oven from Grieve, currently used for curing printing plates at a customer's facility.
No. 845 is a 150°F electrically-heated drawer oven from Grieve, currently used for curing printing plates at a customer's facility.

Workspace dimensions inside this oven measure 88" wide x 63" deep x 60" high. 80KW installed in Incoloy-sheathed tubular heating elements provide the heat, while a 6,000 CM 5-HP recirculating blower furnishes horizontal front-to-back airflow across the workloads.

This Grieve drawer oven futures 4" insulated walls, aluminized steei interior and exterior, plus an access door to the heat chamber for maintenance. Eight drawers, 84" wide x 54" long X I" high, are each rated for 50 lb. loading. Explosion venting panels are built into the oven roof.

Safety equipment is on-board this Grieve oven to handle 1..34 gallons of flammable solvents, including a manual reset excess temperature controller, back-up heating element relay, separately powered forced exhauster, exhauster airflow safety switch, recirculating blower airflow safety switch and purge timer.

The drawers on the No. 845 open to extend 40" in front of the oven to accommodate the large workpieces involved in this particular application.

For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, II 60073-2898. Phone: (847)546-8225. Fax: (847)546-9210. Web: www.grievecorp com. Email: sales@grievecorp.com. Attention: Frank Calabrese.

The Grieve Corporation, 500 Hart Road, Round Lake, IL 60073-2898. Tel: 847-546-8225; Fax: 847-546-9210.