News | November 13, 2024

Anti-Fatberg Invention Could Help Unclog City Sewers

Engineers from RMIT University have invented a protective coating for concrete pipes that could help drastically reduce the formation of fatbergs in sewers.

Fat, oil and grease (known as FOG) – notorious for solidifying inside pipes and concrete sewers – causes half of all sewer blockages in the United States and 40% in Australia. The cost of these blockages in terms of maintenance and rehabilitation is estimated at US$25Bin the US and A$100M in Australia per year.

It is the mixture of fat, oil and grease with calcium and water in sewers that often leads to the formation of fatbergs. But the team’s zinc-enhanced polyurethane coating offers a promising sustainable solution by reducing the release of calcium from concrete blocks by up to 80% compared with uncoated concrete.

The study led by Dr Biplob Pramanik mimicked a sewer environment under extreme conditions that rapidly sped up the fatberg formation process over 30 days.

It showed the coating reduced build-up of FOG on concrete by 30% compared to non-coated concrete.

“The reduction of fat, oil and grease build-up can be attributed to the significantly reduced release of calcium from coated concrete, as well as less sticking of FOG on the coating surface compared to the rough, uncoated concrete surface,” said Pramanik, Director of Water: Effective Technologies and Tools (WETT) Research Centre at RMIT.

“Traditional coatings like magnesium hydroxide, widely used for over two decades, are effective in controlling sewer corrosion but can inadvertently contribute to FOG build-up by interacting with fatty acids.”

The team’s invention is stable in water and withstands temperatures of up to 850 degrees Celsius. It is also self-healing at room temperature, meaning it can repair any damage to itself and extend its lifespan.

“We drew inspiration from the regenerative capabilities observed in nature, including human skin’s ability to heal itself,” Pramanik said.

Co-researcher Dr Sachin Yadav said the team examined the healing performance of the coatings by inflicting surface scratches with a blade.

“The creation of surface scratches on the self-healing polyurethane coating sample triggered the healing process,” Yadav said.

“After the healing period, we observed a noticeable improvement in the surface scratches.”

Next steps
The team is developing an improved coating to achieve a greater reduction of FOG deposition in sewers by enhancing its self-healing capabilities and mechanical strength.

Pramanik is also the Chief Investigator for a recently announced ARC Linkage Project that will develop an advanced grease interceptor for restaurants and other food service establishments to remove small FOG particles more effectively than current technologies.

His team at RMIT is partnering with South East Water, VicWater, Water Research Australia, Barwon Region Water Corporation, Queensland Urban Utilities and water technology company ACO on the ARC Linkage Project.

Source: RMIT University