Centrifugal Barrel Finishing Machines provide the most economical, high-speed finishing available.
MFI's HZ Series Centrifugal Barrel finishing machines provide the most economical, high speed finishing available. HZ machines operate on the "ferris wheel" principle with a 1:1 ratio if barrel rotation of turret rotation. Four barrels are mounted at the periphery of a large turret. Each barrel is loaded to approximately 50-80% full with media, parts and water. During operation, rotation of the turret creates force on the media and parts inside each barrel. This force reduces the cycle time needed to complete the finishing of the parts by up to a factor of 30 over conventional vibratory and barrel finishing.
Pegco Process Labs., Div. Of Kearsarge Peg Co. Inc., 44 Kearsarge Street, Bartlett, NH 03812. Tel: 603-374-2341; Fax: 603-374-2366.