ENTank Plating System

Palm Internationalnk electroless nickel plating systems are the highest quality available, and are supplied complete and ready to operate. They are available either with solid stainless steel construction (to be used with the ENstat II anodic passivation system) or with a polypropylene liner in a stainless steel shell. Only extra low carbon grade Type 304 or 316 stainless steel is used to guarantee complete resistance to nitric acid. Likewise, the polypropylene is stress relieved, virgin material, welded or extruded with copolymer rod under an inert atmosphere to ensure even expansion and freedom from defects. These techniques, while more expensive than others, significantly extend the life of electroless nickel systems. The quality that Palm provides helps ensure that their equipment will provide many years of reliable service.

Each tank includes an air spider, a sealless vertical centrifugal pump, either an external ENheat heat exchanger or stainless steel electric immersion heaters, and filter bag holders, with all necessary piping and valves. Systems and replacement liners are stocked in 50, 100, 150 and 200 gallon sizes, and plating tanks of any capacity can be fabricated. Special designs for special applications with external filter chambers, sloped bottoms, or solution agitation can also be fabricated.

<%=company%>, 1289 Bridgestone Pkwy, La Vergne, TN 37086; Tel: 615-793-1990. Fax: 615-793-1995.