Product/Service

In-Line/High volume -continuous deburring/deflashing

Source: Advanced Deburring & Finishing

In-Line/High volume -continuous deburring/deflashing
A continuous through feed system can be loaded via conveyor from a press
A continuous through feed system can be loaded via conveyor from a press or machining operation, eliminating manual load/unloading operations greatly increasing production rates. Systems are available for deburring or burnishing utilizing steel polishing media.

Thru-feed machines are integrated with materials handling systems including an oscillating parts-media separator, incorporating a secondary "fines" removal deck and a media return conveyor – for complete automatic processing of high production parts.

Parts may be fed into the machine at short intervals, direct from preceding operations. These systems are ideally suited for incorporating washer, dryer, or rust-inhibiting operations. Being specifically designed for processing parts on a thru-feed basis, requiring process cycles of from 6 to 15 minutes, depending on part size and finishing demands.

Engineering – Advanced Deburring & Finishing can recommend specific sizes and options to complement your current operation and parts process, through our no-charge sample processing.

See our "Eliminate manual deburring on precision components" , "Precision Deburring using spindle finishing" and "Vibratory Finishing with round bowl machine" for other options in vibratory finishing.

Advanced Deburring & Finishing, 25 Marianne Drive, York, PA 17402. Tel: 717-767-4843; Fax: 717-764-1056.