Ion Exchange Regeneration System
The system's regeneration modules are designed to regenerate anion, cation and chelated resins according to a manufacturer's specifications. These systems feature fully automated regeneration cycles with resettable timing cycles.
The systems are equipped with the manufacturer's trademarked rinse water conservation features, which empty columns after each process cycle to minimize regenerant dilution and to facilitate transportation of the column. These systems can also segregate spent regenerant from rinse water to make recovery and/or treatment easier.
The systems also feature a NO-FAIL regeneration option that uses flow sensors on the regenerant lines to measure the actual amount of acid and caustic added to the resin to insure a complete regeneration. If the system takes more time than it should, an alarm sound signals the operator to investigate the problem. They cycle then restarts from where it stopped.
These compact systems have the ability to regenerate columns of any size. However, the manufacturer recommends portable columns only up to 10 ft3. For fixed installations, any size column can be regenerated.
<%=company%>, 410 Bryant Circle, Ojai, CA 93023-3312. Tel: 805-646-3706. Fax: 805-646-3923.