Modular Heat Trace Control System

The new IntelliTRACE system is a complete control solution designed for heat trace applications, such as process temperature maintenance, freeze protection, and roof/gutter de-icing. The modular design of the system's control panels and components allows users to select only features needed for their specific heat trace installation, which can minimize the purchase price and simplifying system configuration. The single-channel system uses microprocessor-based control and comes completely pre-wired and assembled, with a variety of options that include three different AC line voltages (120, 240 and 277), RS-485 communications interface, and Ground Fault Indicator.

Standard features of the system include the availability of three control modes: ON/OFF, PID, and SMART tuning. The system's temperature alarm can be programmed for process deviation, band, high/low, and latching/non-latching (manual or automatic reset). The low current alarm can be set from 0 to 30 A in 1 A increments, and the optional GFI alarm trip can be adjusted over a range from 5 mA to 100 mA. In addition, the dual digital display can be programmed for either °C or °F.

All systems are designed for universal inputs, which include types J, K, L, N, R and S thermocouples, RTDs, current, and voltage. Each unit comes in a NEMA 4X glass fiber reinforced enclosure (H12.5- × W10.5- × D6-in.) that includes a solid-state relay with 30 A rating at 40°C, mounted on a heatsink, and a current transformer to measure operating current. The optional GFI modules have a shutdown contactor and illuminated reset switch. A terminal block is used for field connections on all units.

Chromalox Precision Heat and Control, 701 Alpha Drive, Pittsburgh, PA 15238. Tel: 443-2640 or 412-967-3803. Fax: 412-967-5148.