Precision Deburring Using Spindle Finishing

For precision deburring, spindle finishing may provide the results you are looking for. Gears, bearing cages, splined shafts, pump rotors, jet blades, all parts requiring uniform deburring, finishing and RMS improvement can be accomplished with our spindle finishing equipment. Variations in machine size allow us to select a model that is based part size/production. A variety of operations can be accomplished with this equipment like deburring, radius edges, improving surface finish and providing light edge break to name a few.

Advantages of Spindle Finishing:

• Rapid, precision finishing of parts
• Wide variety of specific finishing results
• Part dimensions maintained to extremely close tolerances
• Uniform deburring, radius forming, blending of machine grind lines and improved micro-inch surface finish
• Short process cycles
• No part on part impingement
• Process repeatability

Engineering – Advanced Deburring & Finishing can recommend specific sizes and options to complement your current operation and parts process, through our no-charge sample processing.

See our "In Line/High Volume – continuous deburring/deflashing" , "Eliminate manual deburring on precision components" and "Vibratory Finishing with round bowl machine" for other options in vibratory finishing.

Advanced Deburring & Finishing, 25 Marianne Drive, York, PA 17402. Tel: 717-767-4843; Fax: 717-764-1056.