Sahara Industrial Ovens announced the shipment of a custom Dryer/Curing Oven to an electrical transformer manufacturer in Middlefield, Ohio. The custom Drying/Curing oven will be used to cure/heat magnetic windings. To make low-noise transformers, the windings must be kept tight. During the curing process, the metal windings expand, and gaps are introduced, which cause the transformers to be noisy. The customer eliminated this problem by applying a DC voltage to the transformer during the curing process. The magnetic field created by the DC voltage pulls the windings together and holds them in place until the curing cycle is complete. This practice allowed the customer to construct significantly lower noise transformers.
Sheffield, OH (PRWEB) - Standard Sahara Ovens are also available for quick delivery and are available as either gas fired or electric heated in three temperature ranges, 350˚F up to 800˚F.
Unique features of this custom dryer oven included:
o At the event of a sensor failure the temperature controller will switch instantaneously to the alternative thermocouple thus allowing the process to complete and avoid lost cure cycle
About Sahara Ovens
John Benko started the company in 1983 with two ideas that would revolutionize an industry. The first was an elevating tank truck platform that would ultimately become the G-RAFF Elevating Tank Truck Platform, and the second was the Sahara Hot Box, an energy saving Drum Warming Oven designed to heat from one (1) to thirty-two (32) 55-gallon drums. Benko Products specializes in Drum Heaters and Drum Ovens.
Benko Products applied its mission of engineering excellence to become the most respected leader in drum warming ovens, and it utilizes that same principle with its extensive line of industrial ovens and furnaces.