Product/Service

Transistorized Induction Heating Power Supply

Source: Inductoheat
Transistorized Induction Heating Power Supply
The Statipower SP12 transistorized induction heating power supply is designed to match multi-turn coils (400 to 2,000 V) that are used for hardening, tempering, tube heating, crystal growing, brazing, wire and strip heating, and other induction heating applications
The Statipower SP12 transistorized induction heating power supply is designed to match multi-turn coils (400 to 2,000 V) that are used for hardening, tempering, tube heating, crystal growing, brazing, wire and strip heating, and other induction heating applications. A variety of heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformers.

The device features a unitized design for stand-alone operation. Users connect three-phase 460 V input power, cooling water, and heating coil until ready to begin heating. The cabinets are designed to accommodate a variety of fixtures, conveyors, and part handling machines. Complete stand-alone control and monitoring include manual start/stop push buttons, heat level control with a 10-turn lockable dial, four meters, and annunciator lights.

The device is available in 3, 10, and 30 kHz models available from 25 kW to 1,200 kW output. Specifications include:

  • Input power factor: 0.95 under all operating conditions
  • Output regulation: Voltage, power or current
  • Energy conversion efficiency: 85% minimum
  • Output regulation accuracy: ±1% of regulated power with ±10% line variance
  • Water requirements: 95° (35°C) max

In addition, users can control the device via remote or computer control, and an optional RS-232 interface is available computer monitoring, data logging, and control.

Inductoheat, 32251 North Avis Drive, Madison Heights, MI 48071. Tel: 313-585-9393. Fax: 313-589-1062